CC Series Deep Type Bucket（HDPE & NYLON）
• CC also belong to overloading agricultural type deep winnowing pan series, its unique design side to improve the fill factor of bucket volume, at the same time can use smaller bucket is apart from the installation, can be appropriately increased production of elevator.
• According to north American prototype bucket of this series, also fully combining with the characteristics of domestic elevator design, can with foreign HD/CC series winnowing pan used interchangeably.
• Suggest hoist speed 2.5 meters/seconds or less, can improve the nose wheel diameter size, due to throw food Angle change and adjusted;
• Recommended "( Y-Z) + 10% volume as available capacity of the engineering design.
 |  |
The data in the table is based on HDPE material, and the corresponding data of nylon material is +1.5% on this basis)
Model | Length A (mm) | Proj. B (mm) | Depth C (mm) | Height H (mm) | Distance D (mm) | Center E (mm) | Number of Holes | Hole d (mm) | Capacity (Z-Y)+10% (L) | Capacity (Z-Y) (L) |
CC4x3 | 110 | 90 | 78 | 51 | 22 | 50 | 2 | 7 | 0.30 | 0.27 |
CC5x4 | 136 | 114 | 102 | 66 | 32 | 60 | 2 | 7 | 0.69 | 0.63 |
CC6x4 | 160 | 114 | 102 | 61 | 32 | 90 | 2 | 7 | 0.81 | 0.74 |
CC7x4 | 186 | 114 | 102 | 68 | 32 | 120 | 2 | 9 | 0.94 | 0.85 |
CC6x5 | 160 | 142 | 126 | 80 | 40 | 90 | 2 | 9 | 1.28 | 1.16 |
CC7x5 | 186 | 142 | 126 | 80 | 40 | 120 | 2 | 9 | 1.45 | 1.32 |
CC8x5 | 210 | 142 | 126 | 81 | 40 | 120 | 2 | 9 | 1.64 | 1.49 |
CC9X5 | 242 | 142 | 126 | 84 | 40 | 85 | 3 | 9 | 1.76 | 1.60 |
CC10X5 | 265 | 142 | 126 | 84 | 40 | 90 | 3 | 9 | 2.05 | 1.87 |
CC8x6 | 210 | 168 | 150 | 102 | 45 | 120 | 2 | 9 | 2.45 | 2.23 |
CC9X6 | 242 | 170 | 150 | 102 | 45 | 85 | 3 | 9 | 2.59 | 2.35 |
CC10X6 | 262 | 170 | 150 | 92 | 45 | 90 | 3 | 9 | 2.86 | 2.60 |
CC11X6 | 292 | 170 | 150 | 100 | 45 | 100 | 3 | 9 | 3.30 | 3.00 |
CC12X6 | 315 | 170 | 150 | 98 | 45 | 85 | 4 | 9 | 3.52 | 3.20 |
CC13X6 | 340 | 170 | 150 | 92 | 45 | 85 | 4 | 9 | 3.74 | 3.40 |
CC13X7 | 340 | 200 | 170 | 113 | 50 | 90 | 4 | 9 | 4.84 | 4.40 |
CC14X8 | 370 | 225 | 214 | 145 | 55 | 95 | 4 | 9 | 7.85 | 7.14 |
CC16X8 | 420 | 224 | 206 | 133 | 55 | 85 | 5 | 9 | 9.13 | 8.30 |
CC18X8 | 474 | 230 | 216 | 151 | 55 | 95 | 5 | 9 | 11.00 | 10.00 |
CC20X8 | 522 | 230 | 216 | 149 | 55 | 90 | 6 | 11 | 12.10 | 11.00 |
CC Series Deep Type Bucket（HDPE & NYLON）
• CC also belong to overloading agricultural type deep winnowing pan series, its unique design side to improve the fill factor of bucket volume, at the same time can use smaller bucket is apart from the installation, can be appropriately increased production of elevator.
• According to north American prototype bucket of this series, also fully combining with the characteristics of domestic elevator design, can with foreign HD/CC series winnowing pan used interchangeably.
• Suggest hoist speed 2.5 meters/seconds or less, can improve the nose wheel diameter size, due to throw food Angle change and adjusted;
• Recommended "( Y-Z) + 10% volume as available capacity of the engineering design.
| |
The data in the table is based on HDPE material, and the corresponding data of nylon material is +1.5% on this basis)
Model | Length A (mm) | Proj. B (mm) | Depth C (mm) | Height H (mm) | Distance D (mm) | Center E (mm) | Number of Holes | Hole d (mm) | Capacity (Z-Y)+10% (L) | Capacity (Z-Y) (L) |
CC4x3 | 110 | 90 | 78 | 51 | 22 | 50 | 2 | 7 | 0.30 | 0.27 |
CC5x4 | 136 | 114 | 102 | 66 | 32 | 60 | 2 | 7 | 0.69 | 0.63 |
CC6x4 | 160 | 114 | 102 | 61 | 32 | 90 | 2 | 7 | 0.81 | 0.74 |
CC7x4 | 186 | 114 | 102 | 68 | 32 | 120 | 2 | 9 | 0.94 | 0.85 |
CC6x5 | 160 | 142 | 126 | 80 | 40 | 90 | 2 | 9 | 1.28 | 1.16 |
CC7x5 | 186 | 142 | 126 | 80 | 40 | 120 | 2 | 9 | 1.45 | 1.32 |
CC8x5 | 210 | 142 | 126 | 81 | 40 | 120 | 2 | 9 | 1.64 | 1.49 |
CC9X5 | 242 | 142 | 126 | 84 | 40 | 85 | 3 | 9 | 1.76 | 1.60 |
CC10X5 | 265 | 142 | 126 | 84 | 40 | 90 | 3 | 9 | 2.05 | 1.87 |
CC8x6 | 210 | 168 | 150 | 102 | 45 | 120 | 2 | 9 | 2.45 | 2.23 |
CC9X6 | 242 | 170 | 150 | 102 | 45 | 85 | 3 | 9 | 2.59 | 2.35 |
CC10X6 | 262 | 170 | 150 | 92 | 45 | 90 | 3 | 9 | 2.86 | 2.60 |
CC11X6 | 292 | 170 | 150 | 100 | 45 | 100 | 3 | 9 | 3.30 | 3.00 |
CC12X6 | 315 | 170 | 150 | 98 | 45 | 85 | 4 | 9 | 3.52 | 3.20 |
CC13X6 | 340 | 170 | 150 | 92 | 45 | 85 | 4 | 9 | 3.74 | 3.40 |
CC13X7 | 340 | 200 | 170 | 113 | 50 | 90 | 4 | 9 | 4.84 | 4.40 |
CC14X8 | 370 | 225 | 214 | 145 | 55 | 95 | 4 | 9 | 7.85 | 7.14 |
CC16X8 | 420 | 224 | 206 | 133 | 55 | 85 | 5 | 9 | 9.13 | 8.30 |
CC18X8 | 474 | 230 | 216 | 151 | 55 | 95 | 5 | 9 | 11.00 | 10.00 |
CC20X8 | 522 | 230 | 216 | 149 | 55 | 90 | 6 | 11 | 12.10 | 11.00 |
