DS Series Deep Type Bucket（HDPE & NYLON）
• Suitable for gravity discharge or hybrid discharge;
• Recommended minimum bucket is winnowing pan "C" + 25 mm size, can be adjusted according to request of lifting capacity winnowing pan installation spacing;
• Suggest hoist speed 2.5 meters/seconds or less, can improve the nose wheel diameter size, due to throw food Angle change and adjusted;
• Recommended "- Y (Z) + 10% volume as available capacity of the engineering design.
 |  |
The data in the table is based on HDPE material, and the corresponding data of nylon material is +1.5% on this basis)
Model | Length A (mm) | Proj. B (mm) | Depth C (mm) | Height H (mm) | Distance D (mm) | Center E (mm) | Number of Holes | diameter d (mm) | Capacity (X-Y) (L) | Capacity (Z-Y)+10% (L) | Capacity (Z-Y) (L) |
DS1009 | 104 | 90 | 82 | 57 | 24 | 50 | 2 | 7 | 0.40 | 0.29 | 0.26 |
DS1109 | 116 | 90 | 82 | 56 | 25 | 60 | 2 | 7 | 0.42 | 0.30 | 0.27 |
DS1311 | 132 | 115 | 94 | 55 | 35 | 60 | 2 | 7 | 0.65 | 0.50 | 0.45 |
DS1511 | 150 | 118 | 100 | 67 | 35 | 80 | 2 | 7 | 1.07 | 0.90 | 0.80 |
DS1612 | 165 | 124 | 112 | 66 | 40 | 90 | 2 | 7 | 1.10 | 0.81 | 0.74 |
DS1812 | 188 | 125 | 114 | 58 | 40 | 120 | 2 | 9 | 1.20 | 0.73 | 0.66 |
DS1814 | 188 | 140 | 126 | 76 | 40 | 120 | 2 | 9 | 1.70 | 1.32 | 1.20 |
DS1814H | 185 | 140 | 129 | 86 | 40 | 120 | 2 | 9 | 1.73 | 1.32 | 1.2 |
DS2014 | 206 | 140 | 117 | 69 | 40 | 120 | 2 | 9 | 1.65 | 1.05 | 0.95 |
DS2312 | 235 | 125 | 117 | 75 | 40 | 120 | 2 | 9 | 1.70 | 1.32 | 1.20 |
DS2314 | 235 | 142 | 127 | 74 | 40 | 85 | 3 | 9 | 2.10 | 1.60 | 1.45 |
DS2314H | 230 | 140 | 126 | 90 | 40 | 85 | 3 | 9 | 2.2 | 1.61 | 1.45 |
DS2316 | 236 | 164 | 148 | 85 | 45 | 85 | 3 | 9 | 2.88 | 1.85 | 1.68 |
DS2316H | 235 | 160 | 148 | 83 | 45 | 85 | 3 | 9 | 2.80 | 1.76 | 1.68 |
DS2616 | 266 | 162 | 145 | 92 | 45 | 90 | 3 | 9 | 3.15 | 2.30 | 2.09 |
DS2812 | 280 | 125 | 116 | 80 | 40 | 100 | 3 | 9 | 2.00 | 1.63 | 1.48 |
DS2814 | 284 | 140 | 127 | 78 | 40 | 100 | 3 | 9 | 3.00 | 2.20 | 2.00 |
DS2814H | 278 | 137 | 123 | 84 | 40 | 100 | 3 | 9 | 2.84 | 1.90 | 1.71 |
DS2816 | 282 | 168 | 150 | 90 | 45 | 100 | 3 | 9 | 3.60 | 2.75 | 2.50 |
DS2816H | 278 | 168 | 141 | 90 | 45 | 100 | 3 | 9 | 3.62 | 2.85 | 2.57 |
DS3114 | 312 | 147 | 144 | 90 | 45 | 80 | 4 | 9 | 3.26 | 2.30 | 2.09 |
DS3118 | 312 | 190 | 175 | 100 | 45 | 85 | 4 | 9 | 4.80 | 3.47 | 3.15 |
DS3121 | 316 | 218 | 195 | 133 | 55 | 85 | 4 | 9 | 7.60 | 6.20 | 5.56 |
DS3518 | 358 | 188 | 175 | 104 | 50 | 95 | 4 | 9 | 5.80 | 4.50 | 4.10 |
DS4118 | 419 | 190 | 178 | 103 | 50 | 85 | 5 | 9 | 8.40 | 5.64 | 5.13 |
DS4621 | 460 | 220 | 196 | 131 | 55 | 95 | 5 | 9 | 12.00 | 9.80 | 8.90 |
DS Series Deep Type Bucket（HDPE & NYLON）
• Suitable for gravity discharge or hybrid discharge;
• Recommended minimum bucket is winnowing pan "C" + 25 mm size, can be adjusted according to request of lifting capacity winnowing pan installation spacing;
• Suggest hoist speed 2.5 meters/seconds or less, can improve the nose wheel diameter size, due to throw food Angle change and adjusted;
• Recommended "- Y (Z) + 10% volume as available capacity of the engineering design.
| |
The data in the table is based on HDPE material, and the corresponding data of nylon material is +1.5% on this basis)
Model | Length A (mm) | Proj. B (mm) | Depth C (mm) | Height H (mm) | Distance D (mm) | Center E (mm) | Number of Holes | diameter d (mm) | Capacity (X-Y) (L) | Capacity (Z-Y)+10% (L) | Capacity (Z-Y) (L) |
DS1009 | 104 | 90 | 82 | 57 | 24 | 50 | 2 | 7 | 0.40 | 0.29 | 0.26 |
DS1109 | 116 | 90 | 82 | 56 | 25 | 60 | 2 | 7 | 0.42 | 0.30 | 0.27 |
DS1311 | 132 | 115 | 94 | 55 | 35 | 60 | 2 | 7 | 0.65 | 0.50 | 0.45 |
DS1511 | 150 | 118 | 100 | 67 | 35 | 80 | 2 | 7 | 1.07 | 0.90 | 0.80 |
DS1612 | 165 | 124 | 112 | 66 | 40 | 90 | 2 | 7 | 1.10 | 0.81 | 0.74 |
DS1812 | 188 | 125 | 114 | 58 | 40 | 120 | 2 | 9 | 1.20 | 0.73 | 0.66 |
DS1814 | 188 | 140 | 126 | 76 | 40 | 120 | 2 | 9 | 1.70 | 1.32 | 1.20 |
DS1814H | 185 | 140 | 129 | 86 | 40 | 120 | 2 | 9 | 1.73 | 1.32 | 1.2 |
DS2014 | 206 | 140 | 117 | 69 | 40 | 120 | 2 | 9 | 1.65 | 1.05 | 0.95 |
DS2312 | 235 | 125 | 117 | 75 | 40 | 120 | 2 | 9 | 1.70 | 1.32 | 1.20 |
DS2314 | 235 | 142 | 127 | 74 | 40 | 85 | 3 | 9 | 2.10 | 1.60 | 1.45 |
DS2314H | 230 | 140 | 126 | 90 | 40 | 85 | 3 | 9 | 2.2 | 1.61 | 1.45 |
DS2316 | 236 | 164 | 148 | 85 | 45 | 85 | 3 | 9 | 2.88 | 1.85 | 1.68 |
DS2316H | 235 | 160 | 148 | 83 | 45 | 85 | 3 | 9 | 2.80 | 1.76 | 1.68 |
DS2616 | 266 | 162 | 145 | 92 | 45 | 90 | 3 | 9 | 3.15 | 2.30 | 2.09 |
DS2812 | 280 | 125 | 116 | 80 | 40 | 100 | 3 | 9 | 2.00 | 1.63 | 1.48 |
DS2814 | 284 | 140 | 127 | 78 | 40 | 100 | 3 | 9 | 3.00 | 2.20 | 2.00 |
DS2814H | 278 | 137 | 123 | 84 | 40 | 100 | 3 | 9 | 2.84 | 1.90 | 1.71 |
DS2816 | 282 | 168 | 150 | 90 | 45 | 100 | 3 | 9 | 3.60 | 2.75 | 2.50 |
DS2816H | 278 | 168 | 141 | 90 | 45 | 100 | 3 | 9 | 3.62 | 2.85 | 2.57 |
DS3114 | 312 | 147 | 144 | 90 | 45 | 80 | 4 | 9 | 3.26 | 2.30 | 2.09 |
DS3118 | 312 | 190 | 175 | 100 | 45 | 85 | 4 | 9 | 4.80 | 3.47 | 3.15 |
DS3121 | 316 | 218 | 195 | 133 | 55 | 85 | 4 | 9 | 7.60 | 6.20 | 5.56 |
DS3518 | 358 | 188 | 175 | 104 | 50 | 95 | 4 | 9 | 5.80 | 4.50 | 4.10 |
DS4118 | 419 | 190 | 178 | 103 | 50 | 85 | 5 | 9 | 8.40 | 5.64 | 5.13 |
DS4621 | 460 | 220 | 196 | 131 | 55 | 95 | 5 | 9 | 12.00 | 9.80 | 8.90 |
