E Series Shallow type Bucket（HDPE & NYLON）
• Materials suitable for high speed centrifugal unloading and light density of ascension;
• Suggest hoist speed 3.5 meters/seconds or less, can improve the nose wheel diameter size, due to throw food Angle change and adjusted;
• Recommended "- Y (Z) + 5% volume as available capacity of the engineering design.
 |  |  |
The data in the table is based on HDPE material, and the corresponding data of nylon material is +1.5% on this basis)
Model | Length A (mm) | Proj. B (mm) | Depth C (mm) | Height H (mm) | Distance D (mm) | Center E (mm) | Number of Holes | diameter d (mm) | Capacity (Z-Y)+5% (L) | Capacity (Z-Y) (L) |
E30 | 187 | 145 | 92 | 62 | 30 | 100 | 2 | 9 | 1.04 | 0.99 |
E36 | 236 | 147 | 94 | 65 | 30 | 120 | 2 | 9 | 1.38 | 1.31 |
E40 | 287 | 179 | 111 | 70 | 35 | 90 | 3 | 9 | 2.36 | 2.25 |
E50 | 312 | 189 | 123 | 81 | 40 | 80 | 4 | 9 | 3.31 | 3.15 |
E60 | 339 | 222 | 142 | 92 | 40 | 85 | 4 | 9 | 4.52 | 4.30 |
E Series Shallow type Bucket（HDPE & NYLON）
• Materials suitable for high speed centrifugal unloading and light density of ascension;
• Suggest hoist speed 3.5 meters/seconds or less, can improve the nose wheel diameter size, due to throw food Angle change and adjusted;
• Recommended "- Y (Z) + 5% volume as available capacity of the engineering design.
| | |
The data in the table is based on HDPE material, and the corresponding data of nylon material is +1.5% on this basis)
Model | Length A (mm) | Proj. B (mm) | Depth C (mm) | Height H (mm) | Distance D (mm) | Center E (mm) | Number of Holes | diameter d (mm) | Capacity (Z-Y)+5% (L) | Capacity (Z-Y) (L) |
E30 | 187 | 145 | 92 | 62 | 30 | 100 | 2 | 9 | 1.04 | 0.99 |
E36 | 236 | 147 | 94 | 65 | 30 | 120 | 2 | 9 | 1.38 | 1.31 |
E40 | 287 | 179 | 111 | 70 | 35 | 90 | 3 | 9 | 2.36 | 2.25 |
E50 | 312 | 189 | 123 | 81 | 40 | 80 | 4 | 9 | 3.31 | 3.15 |
E60 | 339 | 222 | 142 | 92 | 40 | 85 | 4 | 9 | 4.52 | 4.30 |
