• Carcass can be made from Polyester EP, Nylon NN, Cotton CC, and Polyester Cotton TC.
• Cover rubber classifications under different applications: General, Oil-resistant, AcidAlkali resistant, Cold-resistant, Anti-static, Flame retardant, Abrasion-resistant and Heat-resistant.
• Top cover classifications under different surface shapes: flat belt and patterned belt.
ltem | Unit | Index Value | ||
Cotton Conveyor Belt | Polyester Conveyor Belt | |||
Carcass Material | / | Cotton CC-56 | EP80~EP400 | |
No. of Plies | / | 2~6 | 2~6 | |
Tensile Strength | N/mm | 112~420 | 160~2400 | |
Elongation @ 10% Tensile Strength Adhesion | % | ≤ 4 | ≤ 2 | |
Strength Carcass | Ply to Carcass Ply Cover to Carcass Ply | N/mm | ≥3.2 | ≥4.5 |
N/mm | ≥2.7 | ≥3.5 | ||
Width | mm | 300~2000 | 300~2000 | |
Length | m | ≤ 250 | ≤ 250 |
Type | Tensile Strength | Elongation @ Break | Abrasion Loss |
MPa | % | mm3 | |
Normal Condition | ≥ 15.0 | ≥ 350 | ≤ 200 |
Heavy Abrasive Condition | ≥ 18.0 | ≥ 400 | ≤ 100 |
Heavy Tearing Condition | ≥ 24.0 | ≥ 450 | ≤ 120 |
• Carcass can be made from Polyester EP, Nylon NN, Cotton CC, and Polyester Cotton TC.
• Cover rubber classifications under different applications: General, Oil-resistant, AcidAlkali resistant, Cold-resistant, Anti-static, Flame retardant, Abrasion-resistant and Heat-resistant.
• Top cover classifications under different surface shapes: flat belt and patterned belt.
ltem | Unit | Index Value | ||
Cotton Conveyor Belt | Polyester Conveyor Belt | |||
Carcass Material | / | Cotton CC-56 | EP80~EP400 | |
No. of Plies | / | 2~6 | 2~6 | |
Tensile Strength | N/mm | 112~420 | 160~2400 | |
Elongation @ 10% Tensile Strength Adhesion | % | ≤ 4 | ≤ 2 | |
Strength Carcass | Ply to Carcass Ply Cover to Carcass Ply | N/mm | ≥3.2 | ≥4.5 |
N/mm | ≥2.7 | ≥3.5 | ||
Width | mm | 300~2000 | 300~2000 | |
Length | m | ≤ 250 | ≤ 250 |
Type | Tensile Strength | Elongation @ Break | Abrasion Loss |
MPa | % | mm3 | |
Normal Condition | ≥ 15.0 | ≥ 350 | ≤ 200 |
Heavy Abrasive Condition | ≥ 18.0 | ≥ 400 | ≤ 100 |
Heavy Tearing Condition | ≥ 24.0 | ≥ 450 | ≤ 120 |